Quick answer

Verified

Applies toHandbook edition February 2016Handbook edition January 2017Handbook edition August 2017

Covers only circuits Vauxhall labels for the high beam or a headlight (including “LED headlight”). Headlamp washers, headlamp levelling, headlight range adjustment and adaptive forward lighting are not included; low (dipped) beam has its own page where Vauxhall lists it.

Vauxhall’s handbook doesn’t print fuse ratings, so none is shown. Fit a replacement with the same rating as the fuse you remove — the handbook says: “Data on the replacement fuse must match the data on the defective fuse.”

Right high beam (Halogen)/Right low beam (LED)

Fuse
36
Fuse box
Engine compartment
Location
The fuse box is in the front left of the engine compartment.

Left high beam (Halogen)

Fuse
37
Fuse box
Engine compartment
Location
The fuse box is in the front left of the engine compartment.

LED headlight/Automatic headlight range adjustment

Fuse
38
Fuse box
Engine compartment
Location
The fuse box is in the front left of the engine compartment.

LED headlight left/Automatic headlight range adjustment left

Fuse
45
Fuse box
Engine compartment
Location
The fuse box is in the front left of the engine compartment.

LED headlight right/Automatic headlight range adjustment right

Fuse
50
Fuse box
Engine compartment
Location
The fuse box is in the front left of the engine compartment.

Where is the fuse box?

Engine compartment fuse box

The fuse box is in the front left of the engine compartment.

  1. Disengage the cover and remove it.
  2. After having changed defective fuses, close the fuse box cover and press until it engages.
  3. If the fuse box cover is not closed correctly, malfunction may occur.
Engine compartmentCarFixData schematic
Engine compartment fuse box: map of 57 fuse positions, fuse 36 and 37 and 38 and 45 and 50 highlighted123456789101112131415161718192021222324252627282930313233343539404142434446474849515253545556573637384550
These fusesOther fuse positionsNot usedOur own schematic, drawn from the fuse positions printed in Vauxhall’s handbook illustration of this fuse box. Not to scale and not a manufacturer drawing — always match the number on the fuse box before pulling a fuse.

Where to look

  • 36

    The fuse box is in the front left of the engine compartment.

    Fuse · Right high beam (Halogen)/Right low beam (LED)

    Highlighted on the engine compartment map.

  • 37

    The fuse box is in the front left of the engine compartment.

    Fuse · Left high beam (Halogen)

    Highlighted on the engine compartment map.

  • 38

    The fuse box is in the front left of the engine compartment.

    Fuse · LED headlight/Automatic headlight range adjustment

    Highlighted on the engine compartment map.

  • 45

    The fuse box is in the front left of the engine compartment.

    Fuse · LED headlight left/Automatic headlight range adjustment left

    Highlighted on the engine compartment map.

  • 50

    The fuse box is in the front left of the engine compartment.

    Fuse · LED headlight right/Automatic headlight range adjustment right

    Highlighted on the engine compartment map.

The map shows where each fuse sits. Always confirm the number against the legend on the fuse box cover before pulling anything.

How to replace the fuse safely

  1. Switch off the ignition and all electrical equipment. Take the key out, or move a keyless fob away from the car.
  2. Open the fuse box and find the fuse using the number on the cover legend or the chart on this page.
  3. Pull the fuse straight out with the plastic fuse puller (usually clipped inside the fuse box) or fine-nose pliers.
  4. Look at the metal strip inside the fuse. A broken or burnt strip means it has blown.
  5. Fit a new fuse with exactly the same amperage rating. The number on top and the colour should match.
  6. Refit the cover, switch on and test the component.
  • Never fit a fuse with a higher amperage rating than specified. It can let wiring overheat.
  • Never bridge a fuse with wire, foil or anything else.

Fuse keeps blowing?

A fuse that blows again straight away is doing its job. Something on that circuit is drawing too much current. Common causes are damaged wiring shorting to the bodywork, a failing motor or socket, water getting in, or a faulty accessory. Fitting fuse after fuse, or a bigger fuse, won’t fix the fault and can overheat the wiring. Have the circuit tested by an auto electrician.

Not the fuse? Check these next.

  • Blown bulb

    If only one side is out, a failed bulb is far more likely than a fuse. Check the bulb first.

  • Headlight switch or stalk

    If dipped and main beam behave differently, the switch or stalk may be at fault.

  • Relay or control module

    If both sides fail at the same moment, suspect a relay, the switch or the lighting control module.

  • Earth connection

    Dim or flickering lights often come from a corroded earth point rather than the fuse.

Sources & verification

Applies toHandbook edition February 2016

Status
Verified
Specification
UK market
Last checked
15 October 2026

Applies toHandbook edition January 2017

Status
Verified
Specification
UK market
Last checked
15 October 2026

Applies toHandbook edition August 2017

Status
Verified
Specification
UK market
Last checked
15 October 2026

Fuse layouts can differ between trim levels and optional equipment. Always confirm against the legend on your fuse box.