Find a fuse

Ford Fiesta · 2016

2016 Ford Fiesta ABS Fuse

ABS or stability warning light on? Find the fuses Ford lists for the anti-lock braking system.

  • UK specification
  • Verified data
  • Checked 14 October 2026
  • Sources

Quick answer

Verified

Applies toBuilt from 12 January 2015Built from 17 August 2015Built 7 December 2015 to 7 May 2016Built from 9 May 2016

Fuse 1

The source lists more than one configuration for this fuse position. Only one is fitted to any car. It doesn’t say which vehicles have which, so check the rating on your fuse box legend before replacing it.

Fuse
1
Fuse box
Engine compartment
Location
In the engine compartment
  • 40AAnti-lock braking system moduleWhich vehicles: not stated by the source
  • 30AAnti-lock braking system, electronic stability program moduleWhich vehicles: not stated by the source

Anti-lock braking system, electronic stability program

Fuse
28
Amperage
20A
Fuse box
Engine compartment
Location
In the engine compartment

Ignition, electric power assisted steering, instrument cluster, passive anti-theft system, anti-lock braking system

Fuse
13
Amperage
10A
Fuse box
Passenger compartment
Location
Behind the glove box

Where is the fuse box?

Engine compartment fuse box

In the engine compartment

Our source doesn’t describe how to open this fuse box. Check your owner’s handbook.

Passenger compartment fuse box

Behind the glove box

  1. Open the glove box and empty it.
  2. Press the sides of the glove box inwards and lower the glove box to reach the fuse box.

Fuse box diagram

Full 2016 Ford Fiesta fuse chart

We haven’t drawn a schematic of the engine compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

We haven’t drawn a schematic of the passenger compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

Where to look

  • 1

    In the engine compartment

    Fuse ·40A / 30A · Anti-lock braking system module or Anti-lock braking system, electronic stability program module

    Position not shown on the schematic. Find fuse 1 on the fuse box legend.

  • 28

    In the engine compartment

    Fuse ·20A · Anti-lock braking system, electronic stability program

    Position not shown on the schematic. Find fuse 28 on the fuse box legend.

  • 13

    Behind the glove box

    Fuse ·10A · Ignition, electric power assisted steering, instrument cluster, passive anti-theft system, anti-lock braking system

    Position not shown on the schematic. Find fuse 13 on the fuse box legend.

Always confirm the number against the legend on the fuse box cover before pulling anything.

How to replace the fuse safely

  1. Switch off the ignition and all electrical equipment. Take the key out, or move a keyless fob away from the car.
  2. Open the fuse box and find the fuse using the number on the cover legend or the chart on this page.
  3. Pull the fuse straight out with the plastic fuse puller (usually clipped inside the fuse box) or fine-nose pliers.
  4. Look at the metal strip inside the fuse. A broken or burnt strip means it has blown.
  5. Fit a new fuse with exactly the same amperage rating. The number on top and the colour should match.
  6. Refit the cover, switch on and test the component.
  • Never fit a fuse with a higher amperage rating than specified. It can let wiring overheat.
  • Never bridge a fuse with wire, foil or anything else.

Fuse keeps blowing?

A fuse that blows again straight away is doing its job. Something on that circuit is drawing too much current. Common causes are damaged wiring shorting to the bodywork, a failing motor or socket, water getting in, or a faulty accessory. Fitting fuse after fuse, or a bigger fuse, won’t fix the fault and can overheat the wiring. Have the circuit tested by an auto electrician.

Not the fuse? Check these next.

  • Brakes still work

    With an ABS fault the normal brakes usually still work, but without anti-lock help. Drive carefully and get it checked promptly.

  • Wheel speed sensors

    A dirty or damaged wheel speed sensor is a far more common cause of an ABS light than a fuse.

  • Fault codes

    A scanner that reads ABS codes will usually point to the exact sensor or circuit.

Sources & verification

Applies toBuilt from 12 January 2015

Status
Verified
Specification
UK market
Last checked
14 October 2026

Applies toBuilt from 17 August 2015

Status
Verified
Specification
UK market
Last checked
14 October 2026

Applies toBuilt 7 December 2015 to 7 May 2016

Status
Verified
Specification
UK market
Last checked
14 October 2026

Applies toBuilt from 9 May 2016

Status
Verified
Specification
UK market
Last checked
14 October 2026

Fuse layouts can differ between trim levels and optional equipment. Always confirm against the legend on your fuse box.