Find a fuse

Vauxhall Mokka · 2015

2015 Vauxhall Mokka Electric Window Fuse

Electric windows not moving? Find the fuses Vauxhall lists for the power windows.

  • UK specification
  • Verified data
  • Checked 15 October 2026
  • Sources

Partly covered: Vauxhall published July 2014, February 2015 and August 2015 Mokka handbooks that could apply to a 2015 car, and their fuse charts differ. Vauxhall doesn’t say which cars each edition applies to, so we can’t tell which one matches a particular 2015 Mokka. Every official chart is shown below — check the edition printed near the end of your handbook, or compare with the fuse box legend in your car, before removing anything.

Quick answer

Verified

Applies toHandbook edition July 2014Handbook edition February 2015Handbook edition August 2015

Vauxhall’s handbook doesn’t print fuse ratings, so none is shown. Fit a replacement with the same rating as the fuse you remove — the handbook says: “Data on the replacement fuse must match the data on the defective fuse.”

Power window driver

Fuse
17
Fuse box
Instrument panel (mini fuses)
Location
Interior fuse block is located on the underside of the driver's side instrument panel.

Power windows front

Fuse
03
Fuse box
Instrument panel (S/B fuses)
Location
Interior fuse block is located on the underside of the driver's side instrument panel.

Power windows rear

Fuse
04
Fuse box
Instrument panel (S/B fuses)
Location
Interior fuse block is located on the underside of the driver's side instrument panel.

Where is the fuse box?

Instrument panel fuse box (mini fuses)

Interior fuse block is located on the underside of the driver's side instrument panel.

  1. To access the fuses, remove the storage.
  2. To remove the storage, open and pull it.

Instrument panel fuse box (S/B fuses)

Interior fuse block is located on the underside of the driver's side instrument panel.

  1. To access the fuses, remove the storage.
  2. To remove the storage, open and pull it.

Fuse box diagram

Full 2015 Vauxhall Mokka fuse chart
Instrument panel (mini fuses)CarFixData schematic
Instrument panel fuse box (mini fuses): map of 34 fuse positions, fuse 17 highlighted12345678910111213141516181920212223242526272829303132333417
This fuseOther fuse positionsOur own schematic, drawn from the fuse positions printed in Vauxhall’s handbook illustration of this fuse box. Not to scale and not a manufacturer drawing — always match the number on the fuse box before pulling a fuse.
Instrument panel (S/B fuses)CarFixData schematic
Instrument panel fuse box (S/B fuses): map of 8 fuse positions, fuse 03 and 04 highlighted0102050607080304
These fusesOther fuse positionsOur own schematic, drawn from the fuse positions printed in Vauxhall’s handbook illustration of this fuse box. Not to scale and not a manufacturer drawing — always match the number on the fuse box before pulling a fuse.

Where to look

  • 17

    Interior fuse block is located on the underside of the driver's side instrument panel.

    Fuse · Power window driver

    Highlighted on the instrument panel (mini fuses) map.

  • 03

    Interior fuse block is located on the underside of the driver's side instrument panel.

    Fuse · Power windows front

    Highlighted on the instrument panel (s/b fuses) map.

  • 04

    Interior fuse block is located on the underside of the driver's side instrument panel.

    Fuse · Power windows rear

    Highlighted on the instrument panel (s/b fuses) map.

The map shows where each fuse sits. Always confirm the number against the legend on the fuse box cover before pulling anything.

How to replace the fuse safely

  1. Switch off the ignition and all electrical equipment. Take the key out, or move a keyless fob away from the car.
  2. Open the fuse box and find the fuse using the number on the cover legend or the chart on this page.
  3. Pull the fuse straight out with the plastic fuse puller (usually clipped inside the fuse box) or fine-nose pliers.
  4. Look at the metal strip inside the fuse. A broken or burnt strip means it has blown.
  5. Fit a new fuse with exactly the same amperage rating. The number on top and the colour should match.
  6. Refit the cover, switch on and test the component.
  • Never fit a fuse with a higher amperage rating than specified. It can let wiring overheat.
  • Never bridge a fuse with wire, foil or anything else.

Fuse keeps blowing?

A fuse that blows again straight away is doing its job. Something on that circuit is drawing too much current. Common causes are damaged wiring shorting to the bodywork, a failing motor or socket, water getting in, or a faulty accessory. Fitting fuse after fuse, or a bigger fuse, won’t fix the fault and can overheat the wiring. Have the circuit tested by an auto electrician.

Not the fuse? Check these next.

  • One window or all?

    If only one window has stopped, its switch, motor or regulator is the likely cause. A fuse usually affects several windows.

  • Window lock switch

    Check the driver’s window lock button hasn’t been pressed — it disables the rear (and sometimes passenger) switches.

  • Listen at the door

    A click or hum with no movement points to a failed regulator rather than a fuse.

Sources & verification

Applies toHandbook edition July 2014

Status
Verified
Specification
UK market
Last checked
15 October 2026

Applies toHandbook edition February 2015

Status
Verified
Specification
UK market
Last checked
15 October 2026

Applies toHandbook edition August 2015

Status
Verified
Specification
UK market
Last checked
15 October 2026

Fuse layouts can differ between trim levels and optional equipment. Always confirm against the legend on your fuse box.