Which 2015 Corsa do you have?

The towbar fuse differs between versions of the 2015 Vauxhall Corsa. Until you choose, every possible result is shown.

Not sure which version you have?

    If you can’t confirm it, keep both results in mind and check the fuse box legend before removing anything.

    Quick answer

    Verified

    Option A Handbook edition September 2014 or Handbook edition January 2015

    • UK specification
    • Verified data
    • Checked 14 October 2026
    • Sources

    Vauxhall’s handbook doesn’t print fuse ratings, so none is shown. Fit a replacement with the same rating as the fuse you remove — the handbook says: “Data on the replacement fuse must match the data on the defective fuse.”

    Trailer interface module

    Fuse
    1
    Fuse box
    Engine compartment
    Location
    The fuse box is in the front left of the engine compartment.

    Headlamp levelling/TPMS/ Trailer interface module

    Fuse
    10
    Fuse box
    Engine compartment
    Location
    The fuse box is in the front left of the engine compartment.

    Quick answer

    Verified

    Option B Handbook edition March 2015 or Handbook edition August 2015

    • UK specification
    • Verified data
    • Checked 14 October 2026
    • Sources

    Vauxhall’s handbook doesn’t print fuse ratings, so none is shown. Fit a replacement with the same rating as the fuse you remove — the handbook says: “Data on the replacement fuse must match the data on the defective fuse.”

    Fuse
    1
    Fuse box
    Engine compartment
    Location
    The fuse box is in the front left of the engine compartment.

    Where is the fuse box?

    Engine compartment fuse box

    The fuse box is in the front left of the engine compartment.

    1. Disengage the cover and fold it upwards until it stops.
    2. Remove the cover vertically upwards.
    3. After having changed defective fuses close the fuse box cover and press until it engages.
    4. If the fuse box cover is not closed correctly, malfunction may occur.

    Option A Handbook edition September 2014 or Handbook edition January 2015

    We haven’t drawn a schematic of the engine compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

    Where to look

    • 1

      The fuse box is in the front left of the engine compartment.

      Fuse · Trailer interface module

      Position not shown on the schematic. Find fuse 1 on the fuse box legend.

    • 10

      The fuse box is in the front left of the engine compartment.

      Fuse · Headlamp levelling/TPMS/ Trailer interface module

      Position not shown on the schematic. Find fuse 10 on the fuse box legend.

    Always confirm the number against the legend on the fuse box cover before pulling anything.

    Option B Handbook edition March 2015 or Handbook edition August 2015

    We haven’t drawn a schematic of the engine compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

    Where to look

    • 1

      The fuse box is in the front left of the engine compartment.

      Fuse · Trailer interface module, rear carrier system

      Position not shown on the schematic. Find fuse 1 on the fuse box legend.

    Always confirm the number against the legend on the fuse box cover before pulling anything.

    How to replace the fuse safely

    1. Switch off the ignition and all electrical equipment. Take the key out, or move a keyless fob away from the car.
    2. Open the fuse box and find the fuse using the number on the cover legend or the chart on this page.
    3. Pull the fuse straight out with the plastic fuse puller (usually clipped inside the fuse box) or fine-nose pliers.
    4. Look at the metal strip inside the fuse. A broken or burnt strip means it has blown.
    5. Fit a new fuse with exactly the same amperage rating. The number on top and the colour should match.
    6. Refit the cover, switch on and test the component.
    • Never fit a fuse with a higher amperage rating than specified. It can let wiring overheat.
    • Never bridge a fuse with wire, foil or anything else.

    Fuse keeps blowing?

    A fuse that blows again straight away is doing its job. Something on that circuit is drawing too much current. Common causes are damaged wiring shorting to the bodywork, a failing motor or socket, water getting in, or a faulty accessory. Fitting fuse after fuse, or a bigger fuse, won’t fix the fault and can overheat the wiring. Have the circuit tested by an auto electrician.

    Not the fuse? Check these next.

    • Vauxhall-fitted or aftermarket

      These fuses cover the circuits Vauxhall labels in its handbook. An aftermarket towbar kit may have its own separate fuse.

    • Trailer socket and plug

      Corroded pins in the towbar socket or trailer plug are a common cause. Clean and check them.

    Sources & verification

    Option A Handbook edition September 2014

    Status
    Verified
    Specification
    UK market
    Last checked
    14 October 2026

    Option B Handbook edition January 2015

    Status
    Verified
    Specification
    UK market
    Last checked
    14 October 2026

    Option C Handbook edition March 2015

    Status
    Verified
    Specification
    UK market
    Last checked
    14 October 2026

    Option D Handbook edition August 2015

    Status
    Verified
    Specification
    UK market
    Last checked
    14 October 2026

    Fuse layouts can differ between trim levels and optional equipment. Always confirm against the legend on your fuse box.