Which 2011 Fiesta do you have?

The reversing light fuse & relay differs between versions of the 2011 Ford Fiesta. Until you choose, every possible result is shown.

Not sure which version you have?
  • Ford’s handbook shows 2 passenger fuse box layouts (Type 1 and Type 2) but doesn’t say which cars have which.
  • Type 1: Ford’s chart lists fuses 1–27 and 1 relay.
  • Type 2: Ford’s chart lists fuses 1–49 and 12 relays.
  • Open the passenger fuse box (behind the glove box) and compare it with each chart before removing anything.
  • Many cars carry a manufacturer’s label (often called the VIN plate) that can show the build or production date. It is commonly on a door pillar, under the bonnet or at the base of the windscreen, but the exact place varies.
  • Your owner’s handbook, service record or original sales paperwork may show the build date or specification.
  • The first registration date on your V5C logbook is not the build date. Cars are often built weeks or months before they are registered, so it is only a rough guide near a changeover.
  • A franchised dealer can usually confirm the build date and specification from your VIN.
  • Still unsure? Compare the legend on your fuse box cover with each option.

If you can’t confirm it, keep both results in mind and check the fuse box legend before removing anything.

Quick answer

Verified

Option A Type 1 passenger fuse box · Built 21 June 2010 to 6 February 2011; or Type 2 passenger fuse box · Built 21 June 2010 to 6 February 2011 or Built 7 February 2011 to 1 May 2011 or Built 2 May 2011 to 26 February 2012

  • UK specification
  • Verified data
  • Checked 14 October 2026
  • Sources

Reversing lamp

Fuse
3
Amperage
7.5A
Fuse box
Passenger compartment
Location
Behind the glove box

Reverse lamp

Relay
R12
Fuse box
Engine compartment
Location
In the engine compartment

Quick answer

Verified

Option B Type 1 passenger fuse box · Built 7 February 2011 to 1 May 2011 or Built 2 May 2011 to 26 February 2012

  • UK specification
  • Verified data
  • Checked 14 October 2026
  • Sources

Reversing lamp, Rear view camera (VP)

Fuse
3
Amperage
7.5A
Fuse box
Passenger compartment
Location
Behind the glove box

Reverse lamp

Relay
R12
Fuse box
Engine compartment
Location
In the engine compartment

Where is the fuse box?

Option A Type 1 passenger fuse box · Built 21 June 2010 to 6 February 2011; or Type 2 passenger fuse box · Built 21 June 2010 to 6 February 2011 or Built 7 February 2011 to 1 May 2011 or Built 2 May 2011 to 26 February 2012

Passenger compartment fuse box

Behind the glove box

  1. Open the glove box and empty it.
  2. Press the sides of the glove box inwards and lower the glove box to reach the fuse box.

Engine compartment fuse box

In the engine compartment

Our source doesn’t describe how to open this fuse box. Check your owner’s handbook.

Option B Type 1 passenger fuse box · Built 7 February 2011 to 1 May 2011 or Built 2 May 2011 to 26 February 2012

Passenger compartment fuse box (Type 1)

Behind the glove box

  1. Open the glove box and empty it.
  2. Press the sides of the glove box inwards and lower the glove box to reach the fuse box.

Engine compartment fuse box

In the engine compartment

Our source doesn’t describe how to open this fuse box. Check your owner’s handbook.

Option A Type 1 passenger fuse box · Built 21 June 2010 to 6 February 2011; or Type 2 passenger fuse box · Built 21 June 2010 to 6 February 2011 or Built 7 February 2011 to 1 May 2011 or Built 2 May 2011 to 26 February 2012

We haven’t drawn a schematic of the passenger compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

We haven’t drawn a schematic of the engine compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

Where to look

  • 3

    Behind the glove box

    Fuse ·7.5A · Reversing lamp

    Position not shown on the schematic. Find fuse 3 on the fuse box legend.

  • R12

    In the engine compartment

    Relay · Reverse lamp

    Position not shown on the schematic. Find relay R12 on the fuse box legend.

Always confirm the number against the legend on the fuse box cover before pulling anything.

Option B Type 1 passenger fuse box · Built 7 February 2011 to 1 May 2011 or Built 2 May 2011 to 26 February 2012

We haven’t drawn a schematic of the passenger compartment fuse box (type 1) for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

We haven’t drawn a schematic of the engine compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

Where to look

  • 3

    Behind the glove box

    Fuse ·7.5A · Reversing lamp, Rear view camera (VP)

    Position not shown on the schematic. Find fuse 3 on the fuse box legend.

  • R12

    In the engine compartment

    Relay · Reverse lamp

    Position not shown on the schematic. Find relay R12 on the fuse box legend.

Always confirm the number against the legend on the fuse box cover before pulling anything.

How to replace the fuse safely

  1. Switch off the ignition and all electrical equipment. Take the key out, or move a keyless fob away from the car.
  2. Open the fuse box and find the fuse using the number on the cover legend or the chart on this page.
  3. Pull the fuse straight out with the plastic fuse puller (usually clipped inside the fuse box) or fine-nose pliers.
  4. Look at the metal strip inside the fuse. A broken or burnt strip means it has blown.
  5. Fit a new fuse with exactly the same amperage rating. The number on top and the colour should match.
  6. Refit the cover, switch on and test the component.
  • Never fit a fuse with a higher amperage rating than specified. It can let wiring overheat.
  • Never bridge a fuse with wire, foil or anything else.

Checking the relay

  1. With the ignition off, pull the relay straight out of its socket. Rock it gently if it is tight.
  2. Relays rarely look damaged when they fail. To test, swap in an identical relay with the same part number from a non-essential circuit.
  3. If the fault moves to the other circuit, replace the relay. If it doesn’t, the problem is elsewhere.

Fuse keeps blowing?

A fuse that blows again straight away is doing its job. Something on that circuit is drawing too much current. Common causes are damaged wiring shorting to the bodywork, a failing motor or socket, water getting in, or a faulty accessory. Fitting fuse after fuse, or a bigger fuse, won’t fix the fault and can overheat the wiring. Have the circuit tested by an auto electrician.

Not the fuse? Check these next.

  • Bulb

    A blown bulb is the most common cause. Some cars have only one reversing light.

  • Reverse light switch

    On manual cars, a switch on the gearbox turns the light on in reverse. It can fail or become unplugged.

Sources & verification

Type 1 passenger fuse box · Built 21 June 2010 to 6 February 2011

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 2 passenger fuse box · Built 21 June 2010 to 6 February 2011

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 2 passenger fuse box · Built 7 February 2011 to 1 May 2011

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 2 passenger fuse box · Built 2 May 2011 to 26 February 2012

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 1 passenger fuse box · Built 7 February 2011 to 1 May 2011

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 1 passenger fuse box · Built 2 May 2011 to 26 February 2012

Status
Verified
Specification
UK market
Last checked
14 October 2026

Fuse layouts can differ between trim levels and optional equipment. Always confirm against the legend on your fuse box.