Find a fuse

Ford Fiesta · 2009

2009 Ford Fiesta Heated Windscreen Fuse & Relay

Heated front windscreen not clearing? Find every fuse and relay Ford lists for it.

  • UK specification
  • Verified data
  • Checked 14 October 2026
  • Sources
Which 2009 Fiesta do you have?

The heated windscreen fuse & relay differs between versions of the 2009 Ford Fiesta. Until you choose, every possible result is shown.

Not sure which version you have?
  • Ford’s handbook shows 2 passenger fuse box layouts (Type 1 and Type 2) but doesn’t say which cars have which.
  • Type 1: Ford’s chart lists fuses 1–27 and 1 relay.
  • Type 2: Ford’s chart lists fuses 1–49 and 12 relays.
  • Open the passenger fuse box (behind the glove box) and compare it with each chart before removing anything.

If you can’t confirm it, keep both results in mind and check the fuse box legend before removing anything.

Quick answer

Verified

Option A Type 1 passenger fuse box

  • UK specification
  • Verified data
  • Checked 14 October 2026
  • Sources

Heated windscreen

Fuse
9
Amperage
60A
Fuse box
Engine compartment
Location
In the engine compartment

Ignition, rain sensor, heated windscreen

Fuse
1
Amperage
7.5A
Fuse box
Passenger compartment
Location
Behind the glove box

Quick answer

Verified

Option B Type 2 passenger fuse box

  • UK specification
  • Verified data
  • Checked 14 October 2026
  • Sources

Heated windscreen

Fuse
9
Amperage
60A
Fuse box
Engine compartment
Location
In the engine compartment

Ignition, rain sensor, heated front screen

Fuse
1
Amperage
7.5A
Fuse box
Passenger compartment
Location
Behind the glove box

Heated windscreen, left-hand side

Fuse
32
Amperage
30A
Fuse box
Passenger compartment
Location
Behind the glove box

Heated windscreen, right-hand side

Fuse
33
Amperage
30A
Fuse box
Passenger compartment
Location
Behind the glove box

Heated front screen

Relay
R5
Fuse box
Passenger compartment
Location
Behind the glove box

Where is the fuse box?

Option A Type 1 passenger fuse box

Engine compartment fuse box

In the engine compartment

Our source doesn’t describe how to open this fuse box. Check your owner’s handbook.

Passenger compartment fuse box (Type 1)

Behind the glove box

  1. Open the glove box and empty it.
  2. Press the sides of the glove box inwards and lower the glove box to reach the fuse box.

Option B Type 2 passenger fuse box

Engine compartment fuse box

In the engine compartment

Our source doesn’t describe how to open this fuse box. Check your owner’s handbook.

Passenger compartment fuse box (Type 2)

Behind the glove box

  1. Open the glove box and empty it.
  2. Press the sides of the glove box inwards and lower the glove box to reach the fuse box.

Fuse box diagram

Full 2009 Ford Fiesta fuse chart

Option A Type 1 passenger fuse box

We haven’t drawn a schematic of the engine compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

We haven’t drawn a schematic of the passenger compartment fuse box (type 1) for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

Where to look

  • 9

    In the engine compartment

    Fuse ·60A · Heated windscreen

    Position not shown on the schematic. Find fuse 9 on the fuse box legend.

  • 1

    Behind the glove box

    Fuse ·7.5A · Ignition, rain sensor, heated windscreen

    Position not shown on the schematic. Find fuse 1 on the fuse box legend.

Always confirm the number against the legend on the fuse box cover before pulling anything.

Option B Type 2 passenger fuse box

We haven’t drawn a schematic of the engine compartment fuse box for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

We haven’t drawn a schematic of the passenger compartment fuse box (type 2) for this version yet. Use the fuse and relay numbers on this page and the legend on the fuse box to find the right position.

Where to look

  • 9

    In the engine compartment

    Fuse ·60A · Heated windscreen

    Position not shown on the schematic. Find fuse 9 on the fuse box legend.

  • 1

    Behind the glove box

    Fuse ·7.5A · Ignition, rain sensor, heated front screen

    Position not shown on the schematic. Find fuse 1 on the fuse box legend.

  • 32

    Behind the glove box

    Fuse ·30A · Heated windscreen, left-hand side

    Position not shown on the schematic. Find fuse 32 on the fuse box legend.

  • 33

    Behind the glove box

    Fuse ·30A · Heated windscreen, right-hand side

    Position not shown on the schematic. Find fuse 33 on the fuse box legend.

  • R5

    Behind the glove box

    Relay · Heated front screen

    Position not shown on the schematic. Find relay R5 on the fuse box legend.

Always confirm the number against the legend on the fuse box cover before pulling anything.

How to replace the fuse safely

  1. Switch off the ignition and all electrical equipment. Take the key out, or move a keyless fob away from the car.
  2. Open the fuse box and find the fuse using the number on the cover legend or the chart on this page.
  3. Pull the fuse straight out with the plastic fuse puller (usually clipped inside the fuse box) or fine-nose pliers.
  4. Look at the metal strip inside the fuse. A broken or burnt strip means it has blown.
  5. Fit a new fuse with exactly the same amperage rating. The number on top and the colour should match.
  6. Refit the cover, switch on and test the component.
  • Never fit a fuse with a higher amperage rating than specified. It can let wiring overheat.
  • Never bridge a fuse with wire, foil or anything else.

Checking the relay

  1. With the ignition off, pull the relay straight out of its socket. Rock it gently if it is tight.
  2. Relays rarely look damaged when they fail. To test, swap in an identical relay with the same part number from a non-essential circuit.
  3. If the fault moves to the other circuit, replace the relay. If it doesn’t, the problem is elsewhere.

Fuse keeps blowing?

A fuse that blows again straight away is doing its job. Something on that circuit is drawing too much current. Common causes are damaged wiring shorting to the bodywork, a failing motor or socket, water getting in, or a faulty accessory. Fitting fuse after fuse, or a bigger fuse, won’t fix the fault and can overheat the wiring. Have the circuit tested by an auto electrician.

Not the fuse? Check these next.

  • Engine running

    Heated windscreens usually only work with the engine running, because they draw a lot of current.

  • Only one side clears

    If one half of the screen clears and the other doesn’t, check the fuse for that side first.

  • After a new windscreen

    If the glass has been replaced, check the heating connectors at its edges were plugged back in.

Sources & verification

Type 1 passenger fuse box · Built up to 4 January 2009

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 1 passenger fuse box · Built 5 January 2009 to 31 July 2009

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 1 passenger fuse box · Built 1 August 2009 to 28 February 2010

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 2 passenger fuse box · Built up to 4 January 2009

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 2 passenger fuse box · Built 5 January 2009 to 31 July 2009

Status
Verified
Specification
UK market
Last checked
14 October 2026

Type 2 passenger fuse box · Built 1 August 2009 to 28 February 2010

Status
Verified
Specification
UK market
Last checked
14 October 2026

Fuse layouts can differ between trim levels and optional equipment. Always confirm against the legend on your fuse box.